0.4-1.2mm Galvanized Steel C U Stud Track Drywall Roll Forming Machine With Chain Driving
Production Description
Stud Track Drywall machine is used to plaster board, gypsum board and other decorative finishes lightweight board made of non-load-bearing walls and roof of the building style decoration, a variety of decorative building roof shape, inside and outside the building wall and ceiling scaffolding base material.Products made by this machine are suitable to use in hotels, theaters, shopping malls, factories, office buildings, old building renovation, interior decoration settings, roof and other places.
Gypsum Board Drywall Partition Ceiling System Machine is widely is widely used to produce C U drywall machine, Main c channel machine,wall angle machine, roof batten machine, T bar machine, etc.
The C U drywall machine can do material thickness 0.3-1.2mm with raw material Cold-rolled Steel, Galvanized Coil, PPGI. Also can do C U size from 40mm to 200mm adjust automatically, just put different feeding coil width.
The machine includes decoiler, Feeding and Leveling Device, main forming machine, hydraulic cutting device, the Frequency converter controls the motor speed, the PLC system controls length and quantity automatically.
Our produced profile meet ISO, CE , UL standards, and our machine is applied to steel structure, industry or home.
Technique Data
| | Items | Specifications |
| Material of coil | Material Thickness | 0.45-0.9mm galvanized steel |
| De-coiler | Weight | 3 tons manual |
| Forming system | Rolling Speed | 8-12m/min |
| | Roller Stations | About 13 stations forming |
| | Roller Material | 45# Steel with quenching,surface coated with chrome |
| | Shaft Material | 45# Steel Diameter 60mm shaft |
| | Main Motor Power | 5.5 kw |
| | Hydraulic cutting | 4 kw |
| Cutting system | Material of cutting | CR12Mov with quench treatment |
| | Hardness | HRC58-62 |
| | Tolerance | +-1.5mm |
| Electrical control | Electric Source | 380V 50HZ 3 Phase or customized |
| | Control System | PLC Delta, encoder:Omron, electric parts:Schneider |
| | Weight | About 3tons |
| | Way Of Drive | single chain |
| | Size of machine | Length 5500mm* Width 800mm* Height 1000m |
Profile Drawing
Maintance and the service of the machine
Daily maintenance with meticulous care plays an important part in extension the equipments’ operation time and the quality of rolling plank. Therefore, please do the following things in your daily
1.The hydraulic tank must be filled with 32# or 46# hydraulic oil before using. The amount of oil is subject to the oil mark
2. Add and daub lube often to the outside parts. (Such as driving chain,Scissors, gears, rollers, )
3. Wipe the surface dust of roller often and particularly work outside. If you do not use it for long time ,you should daub
machine and lube in the roller surface and you need clean it when you use next time.
4. If the equipment does not use for long time, you should use plastics cloth or other articles to cover it and notice to avoid
rain and damp, especially electrical controlling box
5. Cutting device should add lube to the places where need lube to the request
6. Usually look into hydraulic station and the oil quantity of deceleration machine, you should add in time when oil quantity
shortage
7. Electrical components should be guaranteed to work in a dry environment, such as damp. Rain should continue to work after drying.
Product Tags:
|
|
0.4mm Galvanized Steel Drywall Roll Forming Machine C U Stud Track With Chain Driving Images
|
