1.5mm Galvanized Floor Steel Deck Metal Concretion Beam Roll Forming Machine
Technological process
Uncoiling—Feeding&Leveling ---Roll forming—Cutting—Products collecting
Technical Data
| Item NO | Description | UnitType | RF-DF |
| 1 | Steel Thickness | mm | 0.8-1.5mm |
| 2 | Forming Speed | m/min | 0-12m/min |
| 3 | Roller stands | stand | 28-30 |
| 4 | Roller Material | | Gcr15 chromed HRC55-60 |
| 5 | Shaft diameter | | Ф90 |
| 6 | Main Motor Power | kw | 11*2kw |
| 7 | Hydraulic cutting Power | kw | 5.5 |
| 8 | Hydraulic pressure | Mpa | 12 |
| 9 | Power Supply | | 220V, 60HZ,3 phase |
| 10 | Tolerance | mm | 1.5 |
| 11 | Material of cutting | | Cr12mov |
| 12 | Control system | | PLC with touch screen |
| 13 | DRIVE system | Chain | 1.6 inches |
Details of each composition
De-coiler:
5 ton passive decoiler
Cutting way
(1) Cutting motion: The main machine stops and then cut automatically. After cutting, the main machine re-starts automatically.
(2) Material of blade: CR12 with heat treatment
(3) Length measuring: Automatically
(4) Tolerance of length: + 1.5mm
(5) In order to get the perfect profiles, we recommend the post hydraulic cutting by changing the cutting moulds. It is easy to operate.
Control Box
(1) Voltage, Frequency, Phase: 220V, 60 Hz, 3Phase (this is can depend on customer request)
(2) Automatic length measurement:
(3) Automatic quantity measurement
(4) Computer used to control length & quantity. Machine will automatically cut to length and stop when required quantity is achieved
(5) Length inaccuracy can be amended easily.
(6). Control panel: Button-type switch and touch screen
(7) Unit of length: millimeter (switched on the control panel)
Out table
It adopts welded steel and supported roller to transmit the products.
Size: 2000*1000*1000mm, 2 pieces
Details:
Product Tags:
|
|
10m/Min 1.5mm Galvanized Floor Deck Roll Forming Machine CR12 Blade Images
|
